AUTONET TV

I'm Cool With That (AC Exchange)

On a hot day, you want your vehicle's air conditioning to work.  When the air blowing out of your vents isn't cold, it's easy to think, "I'll just take it by the shop and have them top off my refrigerant." But while some people think air conditioning is that simple, it's actually not.

If your refrigerant is low, something has to have happened for it to be depleted.  Perhaps there's a leak in the system.  Or some hoses or clamps have failed.  If the system isn't evaluated by someone who knows air conditioning, it's possible that adding refrigerant will just be a band-aid solution.

It's also possible that contaminants have gotten into the refrigerant, such as carbon dioxide, nitrogen, argon, or air.  Some of those gases do not condense like refrigerant does which can increase the pressure inside the system and strain the lines and other components. At that point, the best course of action may be to have the old refrigerant (with its contaminants) bled from the system and have your AC recharged with new refrigerant.

Bring it to us, and we can inspect and test the system and all its components.  That will include a pressure test for leaks.  Most vehicle manufacturers don't have a service schedule for air conditioning systems, so one way to know when you should have it looked at is when it's not behaving the way it used to.  For example, it may not get cold as fast as it did before or even at all.

So, when hot air is exiting your vents when you want it to be cold, schedule an appointment and have a trained technician take care of it.  Are you cool with that?

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Road Trip? Check! (Trip Inspection)

After months of postponing travel far away from home, a lot of us can't wait to hit the road and scream "Road Trip!" again.  But how long has it been since the vehicle you're planning on taking has had a thorough inspection? And is it roadworthy for several days on the highway? Time to schedule a professional trip inspection in our service center. 

When it comes to long trips, before you go, make sure you can stop.  We can perform a break inspection.  Our technician will visually inspect your brakes for wear and how much life is left in the brake pads and rotors.  They'll also check your brake lines and fluids for fitness and fill.

If it's going to be a long trip, it's important that your engine stays lubricated.  The technician will see when the last time you had an oil change, check the levels and inspect the system for leaks.  If you are close to needing an oil change, it's best to have it done before the trip because no one wants to interrupt a vacation with an oil change in a strange place.  It's also better for your engine to have fresh, clean oil rather than driving with dirty, worn-out oil.

Comfort in any vehicle depends partly on the suspension system.  Our technician can examine shocks and struts so you can avoid an uncomfortable and potentially unsafe journey.  Oh, and you'll definitely want to make sure your wheels are aligned.  A long trip in an out-of-alignment vehicle can be a driving nightmare with potential steering problems and tire damage. 

A couple of little things some drivers take for granted are the engine air filter and wiper blades.  A dirty air filter can cost you money by reducing fuel economy; it adds up on a long trip.  And worn-out wiper blades can make visibility while driving in a rainstorm a blinding, unsafe adventure that you never want to experience, especially in unfamiliar territory.

If you're in the habit of having your vehicle regularly maintained, many of these items may be in excellent condition.  But considering the extra stresses a long road trip places on any vehicle, it's nice to have a set of our trained eyes give your vehicle a closer look. That way you'll be able to gaze YOUR eyes on sights like the Leaning Tower of Niles or the Gopher Hole Museum. 

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Rotation Explanation (Tire Rotation Patterns)

You may notice that when you get your vehicle's oil changed, your service adviser may recommend that you have your tires rotated at the same time.  The reasons are simple.  That will allow your tires to wear more evenly and reduce the noise your tires make as you drive down the road.

There are different ways of rotating tires. If your vehicle has non-directional tires and the same size wheels at each corner, here are the different rotation patterns.

For all-wheel drive and rear-wheel drive vehicles, one is called the rearward cross pattern.  The rear tires are moved to the front and stay on the same side of the vehicle, and the front tires are moved to the rear on the side opposite of where they were on the front. 

For all-wheel and four-wheel drive vehicles, use the X pattern.  The rear tires are moved to the front on the opposite side of the vehicle, and the fronts are moved to the rear on the opposite side of where they were on the front.

For front-wheel drive, there's the forward cross.  The front tires are moved to the rear wheels on the same side of the vehicle as they were on the front and the rear tires are moved to the opposite side of the vehicle than they were on the rear. 

If you have directional tires (they only can be mounted in one direction) and the same size directional wheels, the rear tires are moved to the front on the same side of the vehicle where they were, and the front tires are moved to the rear on the same side they were on the front.   And if you have tires with different sizes of non-directional tires and wheels on the front and rear, rotation will be from one side of the vehicle to the other. 

If you have a spare, it's put into the rotation using a forward cross or rearward cross. 

Yep, that's a lot to keep straight.  So, we suggest letting your service advisor recommend the right rotation pattern for you at the interval your vehicle's manufacturer specifies.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903