AUTONET TV

Why You Have an O2 Sensor (Oxygen Sensor)

If someone asked you what gas made up the largest portion of the atmosphere, what would you guess? Well, it's not oxygen; it only makes up 20.9 percent.  But since we're talking about oxygen, you should know that your vehicle uses oxygen sensors to make sure your engine is running the way it should.

The oxygen sensors measure how much oxygen is in your exhaust.  If there's too much, it means there's a problem with the mixture of fuel and air.  The sensor sends signals to computers in your engine and adjusts the mixture so it maximizes performance and efficiency.  It does this constantly. 

Many vehicles have multiple oxygen sensors.  Some have one close to the engine, another close to the muffler.  Two measurements are better than one since they allow readings to be more accurate.  You may have a vehicle with a dual exhaust, so you'd have twice as many oxygen sensors.

Your oxygen sensors can fail.  One thing that can damage them is contamination from bad fuel.  The sensors can simply wear out, though they usually last a long time.  It's not unusual for an oxygen sensor to last 100,000 miles/160,000 km. One more thing that can cause an oxygen sensor to fail is residue from an engine that's burning oil.  Plus contaminants from the road like salt can also cause problems. 

Here are some signs that your oxygen sensors might be failing.

• The Check Engine light goes on.  In this case, your service facility can plug in a device that will read the code in your engine's computer to see if that's the problem.
• The engine is running roughly.
• Black, sooty smoke is coming out of your tailpipe.
• Your fuel economy is noticeably lower than it used to be.

Head to your service facility and tell your advisor what symptoms your vehicle is experiencing.  They have the equipment and training to track down the issue.  Note that simply replacing the oxygen sensor is often not enough since it doesn't get to the root of the problem; other repairs may be needed. 

So make sure your oxygen sensors are working the way they should be.  Oh, and back to the question of what gas makes up most of the Earth's air?  It's nitrogen, which comprises 78 percent of the air we—and our engines—breathe.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

That Vexing Vapor Venting (Vapor Coming out of Vents)

You may have noticed sometimes on a hot and humid day, vapor will come out of your vehicle's vents when you have the air conditioning on.  Is that something to be concerned about? Well, it depends.

Sometimes that steam or vapor can be caused by water accumulating in the vent system after it has condensed.  And sometimes water can pool at the bottom of a vent.  When you turn on the blower mower, the air hits the water and may create steam or vapor that you can see in the cabin.

One thing to check is if that vapor smells like anything.  If it doesn't, that's a good sign. You may be able to run the fan for a while and the issue may just go away when things dry out.  But moisture collecting in the ventilation hoses in a hot vehicle may be a breeding ground for mold, and that can have health consequences.

There's another possibility. Ventilation systems often have drains to get rid of any accumulated water, and debris can sometimes clog them.  A technician can clean out those drains and you'll be back in business.

One thing to nose around for is a sweet smell coming out of your vents.  Sometimes the heater core (a component of your vehicle's heater system) can develop very tiny holes.  That sweet smell may be coolant that's been vaporized by those tiny holes entering your cabin. 

It's always a good thing to mention to your service advisor any abnormality you're seeing—or smelling—in your vehicle.  By venting a little about your vents, a technician can get to the bottom of the problem before it starts "clouding" the issue.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Cool Running (Water Pump)

Your vehicle is like you in a way.  When it gets hot, it needs to be cooled down.  And one of the key parts to keeping it cool is the water pump.

Now, that's a bit of a misnomer.  It IS a pump, but it's pumping coolant, not pure water.  Cooling off your engine is vital since it builds up heat when it creates power by burning fuel.  Your water pump acts as a way to recirculate that coolant.  It goes through a series of tubes and hoses through the engine where it picks up heat, then is sent off to the radiator to get rid of that heat.  Cooled off, the coolant is recycled through the water pump to start the journey again.

The water pump works by taking mechanical power from the engine, usually from a belt.  Obviously, that belt has to be in good condition and adjusted properly or else the water pump won't be able to do its job.

Here are some things to look for that will signal problems with your water pump.  If your heat gauge is erratic or showing a much higher than normal temperature, that could be a sign of trouble.  Another is if you hear a whine under the hood.  And if that gets louder when you go faster, get it checked right away.  You may see steam coming out from under the hood or coolant may be leaking. 

These signs signal that it's time for you to have a technician check to see where the problem is. Some water pumps are powered by a timing belt.  If your vehicle has that design and your timing belt is due for replacement, sometimes it's a good idea to replace the water pump too, even if it's working properly.  That's because the labor to replace the timing belt can be expensive and it may be wise to proactively take care of the water pump while it's disassembled.

Your service advisor will explain the options available and offer the best path to keeping your water pump doing its job.  Your engine's life depends on it.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Got it Covered! (Timing Cover Maintenance)

You may have heard at one time or another about something called a timing belt or timing chain in your engine.  And you may know that if they fail… well, let's just say that there can be some major engine damage.  So obviously, we want our timing belts and chains to be in tip-top shape.

One part that helps keep them running the way they should is the timing cover.  As you can probably guess, it's something that covers the belt or chain.  The timing cover protects both belts and chains from dirt and road debris.  Timing belts also need to be lubricated so their covers allow them to be lubricated as well.  They have a gasket that insures a good seal for the engine.  If that gasket breaks or develops a leak, then engine oil can escape, and loss of lubrication is never good for an engine component.

Other symptoms of a failed timing cover are leaking coolant, a metallic sound coming from the front of your engine or your Check Engine light coming on.  You might also notice a drop in power when you're going uphill.

It's important that your timing cover be in good condition and functioning properly.  Your repair facility will check out that part of your engine to make sure gaskets are in good shape and the cover is doing the job it's meant to do.  Catch that leaking or broken timing cover in time and your engine will thank you for avoiding some serious damage and an expensive repair.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Passing the Test (How to Prevent Emissions Test Failure)

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903