AUTONET TV

DOG FOOD IN YOUR ENGINE (Keeping Rodents out of your Engine)

A technician was telling us the other day that he was servicing an engine and spotted something he'd never seen before: A collection of dry dog food siting on a horizontal metal ledge near the base of the engine.  It was neatly stashed and was in a spot where the food pellets couldn't have simply fallen down in there.

Even though it's the first time he'd seen dog food in an engine, he immediately knew what was going on.  Critters like mice or chipmunks had found the dog food somewhere nearby and had used the engine as a nice storage unit. 

Mice, squirrels, chipmunks—you name it—like the heat of the engine.  And they'll use that to store up supplies of food for use in cold weather when outside food supplies are scarce.  The problem is they'll also chew on engine components while they're there. And they can do a lot of damage if they start gnawing on the wires.  Depending on how much of your electrical system needs to be replaced, repairs can mount up to the thousands of dollars. 

Those electrical problems can be tricky to track down, too, because the rodents can get to spots technicians don't have easy access to.  Oh, the signs are there; they'll find mouse droppings, acorns… even full mouse nests in your engine.  Yikes.

OK, but even if you get your vehicle fixed, how do you keep the critters from simply setting up their personal pantry again? Here are some things to try:

• Don't leave any food in your vehicle
• Get rid of that sweet-smelling air freshener. The rodents can mistake the scent for food and head right for your vehicle.
• If you have a garage, block all access points for rodents. This can be very hard since they can squeeze through the tiniest spaces you can imagine.
• Some people keep mothballs under the hood; rodents don't love 'em.
• Pop the hood every couple of weeks and look for signs of mice: nests, droppings or stored nuts, acorn shells and pet food.

The next time you bring your vehicle into All Things Automotive & Diesel Service for maintenance or service, your technician will be on the lookout, too. Hey, the dog food belongs in the dog's dish, not supplying fast food for little critters with razor-sharp teeth that can create electrical system mayhem.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

A Fluid Situation (Check Fluid Levels)

There's one fluid in your car you are always careful to keep at a certain level: the fuel. If you don't have fuel, you're not going anywhere.  Your vehicle has other fluids which are vitally important to proper and safe operation, too.  So, here's a "level" headed approach to those "other" fluids.

Engine oil.  This one's probably the most important fluid to maintain at the proper level. Without enough oil, you'll wear out your engine prematurely.  Sometimes vehicles have warning lights on the dash that will tell you to get your oil checked.  Don't ignore that one; get it checked immediately.  Certainly don't go on a long trip at high speeds with your oil level low. Oh, and it's not good to have too much oil in, either. Our pros at All Things Automotive & Diesel Service can advise you on oil levels and tell if you if you should be concerned about abnormal fluctuations.

Windshield washer fluid.  OK, this is one you probably know about.  You certainly miss it when it runs out.  You find yourself trying to clean your windshield with the wipers but you need a little liquid help.  Unless you live in an area that requires you to use an awful lot of windshield washer fluid, one fill-up can often last between oil changes.  Modern vehicles have large enough windshield washer fluid reservoirs to keep you going for quite a while.    

Engine Coolant. Here's another fluid you need to keep your engine running properly.  You need it to keep the engine running at the proper temperature.  Plus, you'll need it for heat when the temperature gets chilly outside. 

Power Steering Fluid. If you have a vehicle that uses power steering fluid, it's important to keep the correct amount in your system. Without enough of it, you might find steering difficult.  Plus, if you’re losing power steering fluid, our experts at All Things Automotive & Diesel Service can find out why and perhaps prevent a more expensive repair later.

Brake Fluid.  You may have heard of hydraulic brakes.  Hydraulic refers to the fluid and is one of the key reasons your brakes work.  Levels should be checked regularly and, like power steering fluid, if you're losing brake fluid, a technician needs to find out why so you can get the issue repaired and maintain your stopping ability.

If you have regular preventative maintenance performed at All Things Automotive & Diesel Service, we’ll keep an eye on all of these fluids when you bring your vehicle in for service.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

"Current" Affairs (Blown Fuses)

You may be driving along and find that suddenly your radio stops working.  There are no numbers on the display.  Then when you get home, you notice the garage door opener doesn't do a thing when you press the button. Hmm, this was working just fine this morning.  Are the two problems somehow related?

No, your vehicle doesn't need an exorcism. This has all the signs of an electrical issue, and when you experience symptoms like those, you've probably blown a fuse.  Most vehicles have fuses just like most houses have circuit breakers (some houses still have fuses). They cut the power when it reaches a pre-determined threshold that could cause major damage if it was allowed to continue.  You might say fuses take one for the team.

Most modern automotive fuses are plastic with a thin strip of metal in them designed to melt when a calibrated amount of power passes through.  The philosophy is it's better for an inexpensive fuse to be destroyed than your sound system or your engine's main computer.

It can be tricky to figure out what fuse has blown and why.  Modern vehicles have many computerized electronic components; they can easily be damaged if too much electricity gets to the wrong spot.  At All Things Automotive & Diesel Service in Idaho Falls, we have technicians trained to trace which fuse has blown and why.

While sometimes a simple fuse replacement will fix the problem, other times there may be some other electrical component that has failed, causing the circuit overload.  Our technicians have special equipment to track down where the power problems are, get to the root of the problem and fix it at the source.

Keep in mind, fuses are there to protect your vehicle. And when they shut down your radio, garage door opener, vanity mirror or anything else, just be thankful they're doing their job. They may have saved you from a much more expensive repair. They've sent an important signal to you about your electrical system.  That's why it's good to keep up with "current" affairs.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

THE IMPORTANCE OF VISIBILITY (Cleaning Vehicle Glass)

We've all been through it. The vehicle ahead of us kicks up mud, slush, snow or salt on our windshield and we can't see a thing.  And not being able to see a thing when we're driving?  Not a good thing.

Debris on a vehicle's glass can be blinding when driving directly into the sun.  And other things can ruin visibility: scratches on the glass, fogged windows, mineral deposits. 

So lets make one thing clear:  Your windows.  Here are some tips.

• Number one rule, don't use abrasives on glass. That means no gritty cleaners that are made for metal.  Avoid at all costs those dark green abrasive pads on some kitchen sponges that are made to clean metal pots and pans UNLESS the manufacturer specifically says they can be used on glass.
• Use the appropriate cleaner for the substance that's being cleaned off. Special automotive glass cleaners are available, and your All Things Automotive & Diesel Service service advisor can make recommendations.
• Vinegar can work wonders. Sometimes you'll see hard, grayish water spots on your windows that nothing seems to take off. Distilled white vinegar (available in the grocery store) gets rid of them safely, quickly and easily.
• Use a microfiber cloth designed for cleaning glass; that's what professional detailers choose.
• Clean the insides of windows, too. That film that develops on the inside of vehicle windows can be the result of plastic interior surfaces decaying in the heat of sunlight (plastic contains oil). The film can also be caused by cigarette smoke. Clean that oily layer off thoroughly.

Now that you have clean windows, here's how to keep 'em clean.

• Replace your wipers at least once a year. Rubber deteriorates the older it gets, even if you rarely use your wipers.
• You might consider a newer type called a "beam" blade. Most have an aerodynamic design that cleans your windshield better, especially at higher speeds.

Your service advisor at All Things Automotive & Diesel Service will be able to recommend good wiper blades for your vehicle and install them properly.

Visibility.  See what we mean?

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

When Metal Meets Metal (Wheel Bearings)

What part of your vehicle has little metal balls inside that are lubricated and allow you to cruise on down the road?  They are wheel bearings, and automotive designers might argue they are human beings' second greatest invention of all time (the first is, of course, the wheel!).

You have a wheel bearing at each wheel.  They allow your wheels to turn freely, minimizing friction that would ordinarily slow you down when metal meets metal.  When one of your wheel bearings starts to go bad, it lets you know. A wheel bearing does its work quietly when it's in good health but starts getting noisy when it isn't.  People describe the noise differently.  Sometimes it sounds like road noise, a pulsating, rhythmic, sound.  That pulse speeds up when your vehicle speeds up. 

Here's what's happening when you hear that sound.  As mentioned, the bearing has these little metal balls inside a ring.  They have a lubricant inside to reduce friction between the balls; modern wheel bearings are sealed and they're intended to do their job without any maintenance. 

Wheel bearings take a beating; you hit some rough potholes or go over some uneven railroad tracks. Sometimes water can get into a bearing and reduce the ability of the lubricant to do its job.  Time starts to take its toll, too. When the lubricant isn't reducing friction like it should, the bearing can heat up. One of those little balls can start shedding pieces of metal and soon those shards start grinding up the other balls.  Friction takes over and soon your wheel isn't turning smoothly. That's what's causing the sound.  If a wheel bearing is not fixed, it could eventually seize up completely, and you can be stranded.

It's a lot easier if you heed the early warning signals, that pulsating noise.  Now, sometimes a similar noise can be caused by a bad tire, but in either case, it's important to have it checked out. Our All Things Automotive & Diesel Service technicians will be able to tell you fairly quickly what the problem is and offer a solution.

Wheel bearings generally don't fail often and usually last from 85,000-100,000 miles/140,000km to 160,000km. But consider them a long-term maintenance item that, once fixed, will keep you heading smoothly to the next destination.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903