Don't Miss a Beat (Importance of Regular Maintenance)
Posted June 27, 2021 10:53 AMIn many places, license plates have to be renewed every year or else you can't drive your vehicle legally. Usually, you'll get a reminder from the agency that issues the plates.
That kind of regular attention needs to be paid to your vehicle as well. Its manufacturer has determined a schedule of service items that need to be done regularly, just like renewing your plates.
Some depend on time, others depend on distance. A perfect example is oil changes. It's the most important scheduled maintenance you can have done to give your engine its longest life possible. The manufacturer recommends the oil filter be changed at the same time.
Here are some more items. Your engine air filter gets dirty and needs adequate air to run most efficiently. The manufacturer recommends an interval for replacing that. Also tires, brake pads, timing belt, oxygen sensor and other items require regular replacement.
This is one of the reasons to find a service facility that you like and keep going there. Many will keep records of what's been done to your vehicle and send you reminders of when it's time to schedule service items. Some do it by mail, others by email. Still others might text you or give you a phone call. Remember, they base those reminders on the vehicle manufacturer's recommendations.
We all have a lot going on in our lives, so these reminders can help you avoid missing important service items that are important to your vehicle's durability and safety. So if you move or change phone numbers or email addresses, make sure your vehicle service facility gets the word. Otherwise you won't get the reminders and your service advisor will wonder what's happened to you!
At the same time, you might want to let your vehicle manufacturer know when you've changed your address, phone number or email address. If there is a safety recall or your manufacturer is offering an extended warranty on some of your vehicle's systems, they'll need to reach you.
All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903
Something to Latch On To (Hood Latch Safety)
Posted June 20, 2021 11:56 AMThe other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid. But when he pulled the hood release inside the car, nothing happened.
Usually, opening any hood is a 2-step process. You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood. There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way.
But in this driver's case, the hood would not release at all when he pulled the handle inside. Not knowing what to do, he called his service advisor, who told him to bring it over. The reason? A hood with a broken latch could be a safety hazard since it is possible it's not securely closed. And in this condition, it's possible for the hood to suddenly release while you are driving, obscuring your view of the road.
Latch issues can be caused by many things, perhaps a broken cable between the hood release and the latch. It's possible that cable just detached or frayed after being opened so many times. If a hood release cable isn't kept lubricated, it can corrode and just lock up.
In this driver's case, the cable had corroded and broken, so it had to be replaced. Unfortunately, many times you won't know you have a problem with your hood latch until one time you pull it and it breaks without warning. When your vehicle is in for routine maintenance like an oil change, a technician will often keep an eye out for signs that your hood latch needs attention so you don't get "locked" out of your engine compartment.
All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903
I Had No Idea! (Four Things You Didn't Know About Vehicles)
Posted June 13, 2021 9:18 AMBet you didn't know:
Some of the earliest rearview mirrors were marketed as "Cop Spotters" so drivers would know when police were following them. Who wants a ticket, anyway? According to eBay Motors, Elmer Berger first patented a rearview mirror that was mounted on the front fenders, on the spare tire secured to the side of the car of at the top of the driver's door frame.
About 80 percent of your vehicle is recyclable. So says The Balance. That means four-fifths of most vehicles can be recycled. Much of that recycling is done by automotive aftermarket recyclers. Between the U.S and Canada, they reclaim enough steel to produce 13 million new vehicles.
The man who invented the first modern cruise control couldn't even drive a car because he was blind! His name, says Smithsonian.com, was Ralph Teetor. Blinded at a young age by a knife accident, Teetor was inspired to create a speed control by a couple of things. One, the U.S. imposed a mandatory 35 mph/55 kph during World War II to conserve fuel and tire rubber, and Teetor wanted drivers to go a safe and steady speed. Plus, a chauffeur who drove him around used to randomly slow down and speed up which irritated Teetor. So he invented a speed control to encourage drivers to drive at a more constant and safer speed.
The first grooved tires were invented in 1904 by Continental. But that was a big improvement over the very first "tires" which were actually metal hoops that made riding in the first cars a pretty rough experience. The first rubber tires were solid rubber, not inflatable like today's tires. Things have come a long way. Modern tires are made with sophisticated rubber compounds that can deal with heat and cold. Plus their tread patterns help drivers get better traction on wet roads when it storms. Still, it's important to make sure yours have enough tread and are properly inflated for maximum safety and performance.
Quite frankly, there's a lot we don't understand about the vehicles we drive. They're much more complicated than the old horse and buggy that preceded them. Leave your vehicle's maintenance and service to highly trained technicians who DO understand how to maintain, diagnose and repair today's modern, sophisticated vehicles.
All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903
Out with the Old (Vehicle Parts that Wear Out)
Posted June 6, 2021 11:20 AMSome drivers don't pay any attention to their vehicles until something breaks. Others take them into their service repair facility for maintenance even before a problem develops. Still, even if you fit into the second group, there are some parts on a vehicle that will simply wear out over time.
Your vehicle has gaskets in several places. They use a flexible material to seal the gaps between metal parts that fit together. After time, that material shrinks or gets brittle and fails. Eventually, after time, you will have to get gaskets replaced.
Same goes for belts. Your engine has belts that help take the mechanical energy of the engine to drive other parts such as the generator and air conditioner. Heat and age will eventually cause these belts to wear out or break, so you'll need new ones at some point.
You'll also find yourself buying brake pads. As much as you may try to go easy on them, brake pads work by wearing off a little bit of them each time they help you stop your vehicle. Do a lot of stop-and-go driving and you'll hasten the process.
No battery lasts forever, and your vehicle's battery is no exception. It can only charge and discharge electricity so many times. Count on getting no more than 4 or 5 years out of a battery, fewer if you live in a very hot spot.
Other parts that don't age well? Tires. They can have plenty of tread left on them, but rubber gets old and loses its flexibility. Tires have their date of manufacturer stamped on them for a reason.
Finally, your muffler is being subject to moisture from inside and out: inside because of moisture-containing exhaust and outside from the elements outdoors. Stainless steel or other alloys will last longer, but after a while, either the moisture or constant pounding from vibrations will take their toll.
That's why it's important to maintain every part on your vehicle. You can't wave a magic wand and make everything last forever, but take care of your vehicle and it'll take care of you.
All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903