AUTONET TV

Out of Joint (CV Joint and Boot Replacement)

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.  

If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The biggest problems come when one of those rubber boots cracks.  Water and dirt can then get into the joint, causing it to wear down and lose all its vital lubrication.  It’s important to have your CV joints inspected regularly so a technician can spot cracks before the CV joints are ruined.  Sometimes just the boot can be replaced before any major damage is done.  But when the joint does go bad, it must be replaced.  

Signs your CV joint needs changing out? You might hear a clicking sound when you turn if the CV joint is worn out. You might notice some thick, black grease around your wheel or on the pavement where you park your vehicle.  You might also feel your vehicle vibrate when you’re going fast.

If you suspect you might have a bad CV joint, bring your vehicle in so a technician can determine what’s going on.  Keep your CV joints in good shape and reduce the risk of them seizing up at an inopportune time so you can avoid being stranded.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Do I Need Brake Service? (Brake Service)

Think of how many times you put your foot on your vehicle’s brake pedal every day.  And think of how much you rely on your brakes to slow down and stop your momentum.  When it comes to safety systems, your brakes are at the top of the list, and that’s why it’s so important to keep them in top condition. Brakes are something you make sure you keep maintained before they start showing signs of problems.

Some of those signs are a grinding sound when you step on the brake pedal, your vehicle pulling to one side when you brake, you don’t feel your brakes stopping you as quickly as they used to, or you notice the brake light is illuminated on your instrument panel. 

We ask a lot of our brakes.  They have to work no matter how hot or cold it is outside.  That means whether it’s sunny, snowing, raining, or icy; you’re traveling at highway speeds or school-zone speeds; or when suddenly you find yourself trying to avoid hitting another vehicle, animal, person, or obstacle in the road.  They have to work on smooth or rough pavement.

When you bring your vehicle in to us for brake service, we will first inspect your brakes and all the parts in the system.  Our technician will closely check all the components for wear, deterioration, and corrosion.  We’ll check fluids, bushings, seals, and other components and make recommendations for what should be replaced or repaired to keep the system in top condition.  We’ll recommend quality parts that meet your vehicle manufacturer’s specifications. 

We want to make sure your vehicle’s brakes are doing for you what they are designed to do.  Your safety—and the safety of all the people around you—is at stake when it comes to your brakes.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Steering You Right (Power Steering Fluid Service)

It’s important for safe driving that two of the most important systems in your vehicle work right.  One is the brakes.  The other is the steering.  Nearly all vehicles on the road have some sort of power steering that allows you to direct a very heavy machine with little effort. 

There are two types, hydraulic and electric.  Many newer vehicles have electric power steering that uses an electric motor to make your steering easier.  But there are many vehicles on the road that use a system that has been around for years.  It uses a power steering pump, a cylinder, several valves, and hydraulic fluid to make it easy for you to turn the wheel. 

If you have hydraulic power steering in your vehicle, it’s important to change your power steering fluid every once in a while.  Over time, the fluid gets contaminated with dirt and other particles.  You might notice your steering is loose, maybe harder to turn and makes a low, straining noise. The first step in determining hydraulic power steering problems is to have your fluid checked.  Its color and smell can give a technician clues to any problems. They will recommend changing it if it has signs of being old, such as the wrong color or smell. 

Because steering is such a vital safety feature in your vehicle, the best strategy is to maintain your power steering according to the vehicle manufacturer’s recommendations.  That means periodically, the fluid should be changed.  That will prolong the life of the other steering systems components, such as hoses, seals, valves, and the power steering pump.  During this service, the technician will replace the fluid, bleed the system and check for leaks.  You’ll be back on the road knowing your vehicle is in top shape to steer you right.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Full Stop (Brake Master Cylinder Replacement)

When you step on your brake pedal, you want to feel confident that your vehicle’s going to stop.  If your brakes aren’t working right, it’s a risk to your safety and the safety of others on the road.  After all, you’re driving a machine that weighs thousands of pounds, and you have to be able to stop that big machine quickly and with control, especially with some of the speeds you travel on the highways. 

The heart of your vehicle’s brake system is the master cylinder.  When you apply the brakes, the master cylinder has pistons, springs, and brake fluid.  That fluid amplifies and distributes the force of your foot through brake lines to calipers at all your wheels.  Those calipers squeeze down on rotors or discs, which is what slows down and stops your vehicle.

For safety, a master cylinder has two cylinders, one for two wheels, and the other for the remaining two wheels.  That way, if there is a failure in one, you’ll still have braking power at half your wheels.

The master cylinder doesn’t last forever, of course, and here are some signs it may have problems.  When you press on the brake pedal, it feels soft and spongy.  You may see the brake light on your instrument panel go on.  You may notice brake fluid leaking, or it may be discolored. 

All of those are signs of brakes that need attention, and among the possible culprits is a master cylinder that has failed.  When you bring it in for a technician to look at, they’ll check not only the master cylinder but also the rest of the components, such as pads, discs, shoes, brake lines, and hoses.  If your master cylinder needs replacing, we’ll make sure all the other parts meet the manufacturer’s specs as well. 

Brakes are important.  Really important. Full stop.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903