AUTONET TV

Slippery When Wet (Driving on Wet Leaves)

When the leaves fall, you might take a sightseeing trip to see them at peak color.  Or you may simply live in a spot where there are a lot of trees.  When those leaves get wet, you'd be surprised to learn just how slippery they can be. 

We all know ice is slippery to drive on.  What causes tires to slip on ice is a thin layer of water that comes between the road and your tires.  Wet leaves can have the same effect.  The surfaces of leaves are super slick when they're dry, even worse when you add a little moisture.  There's one other thing about leaves.  They are smaller than each tire's footprint, so your tread grips the pavement with uneven traction.

One study showed that your stopping distance can more than double on a surface covered with wet leaves when compared to that same road when it's dry.  Double! That can spell trouble.  So if you find yourself heading into an area with wet leaves on the road, slow down before you get into a jam.  If you do start skidding, use the same driving techniques as you would on ice.  Let off the accelerator, resist jamming on the brakes and steer into the skid.  Again, speed can get you into trouble fast on a slippery surface.

One thing that can help is having tires that are appropriate for the way you drive and the places you travel.  Your service advisor can offer suggestions for tires that are right for you.  Have a technician examine your tread depth and the condition of your tires' rubber.  Sun can break down rubber over time, and age can cause tires to fail, even if their tread seems to be deep enough. 

Your tire is the point of traction between your vehicle and the road.  Uncontrolled skids spell trouble and danger.  Slow down when you see wet leaves on the road.  They can make traction disappear before you know it.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

The Truth about Tire Pressure (Tire Inflation)

Most light vehicles (under 10,000 pounds/4,500 kg) in North America sold from 2008 model year on have a feature that many people are confused about.  It's the tire pressure monitoring system (TPMS).  You may have some experience with it yourself if you own a newer vehicle.  Vehicles with TPMS have sensors in each tire that are supposed to warn the driver when tire pressure gets dangerously low.  That's important because tires that are significantly under-inflated can cause very serious accidents.

Unfortunately, many drivers think the TPMS does all the work keeping track of tire pressure. To them, as long as the warning light or gauge isn’t giving a warning, the tires must have the proper amount of air pressure in them.  That's not the case.

Tire pressure monitoring systems aren't all created equal.   Some give you a digital readout of the pressures in each individual tire.  But many simply have a warning light that looks like the cross section of a tire with an exclamation point in the middle.  If you don't know what it is, it's because it's not instantly recognizable as a tire.  In fact, one company that makes TPMS, Schrader Performance Sensors, surveyed drivers.  Their study showed that more than 40 percent of drivers didn't know that that warning light was. 

One out of 5 of the drivers who did know what the light was only looked at their tires after the light came on to see if they could see any that needed air; they never checked them with a tire gauge or had someone else do it.  Ten percent of them didn't do anything when the light came on.

In most vehicles with TPMS, the warning comes on only when the tires are more than 25% underinflated.  The American Automobile Association says that's under the pressure you need for safe vehicle operation.

The bottom line is once a month you should make sure your tires are inflated to the manufacturer's recommendations.  That means each tire should be measured with an accurate, external tire gauge.  To be confident you are getting a correct reading, take your vehicle to a reputable service facility where their equipment is calibrated and they know what they're doing.

Severely underinflated tires can contribute to an accident that kills or severely injures people.  The idea behind TPMS is well intended, but the system was never meant to replace regular inflation measurements and maintenance.  Periodically have your tires checked for proper inflation.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Steer Me Right! (Failing Power Steering Hose)

Most drivers love how easy it is to turn their vehicles, and they have power steering to thank.  Engineers have figured out a way to take some of your engine's power to help you turn. Without it, steering can be quite a chore.  New power systems are electric, but there are still plenty of the older hydraulic power steering systems out there, and it's wise to keep them working the way they should so you don't find yourself stranded without power steering.

Those hydraulic power systems use a fluid under pressure that is pumped to a device that helps you turn your wheels more easily.  It's that pressure that presents the challenge.  After your vehicle's seen a few years on the road, you may find your steering isn't quite as easy as it was.  You may hear a groaning or humming sound when you turn. 

One component that can fail is the pressure hose that carries that fluid from the power steering pump to that turning assist mechanism.  The hose is made of rubber and can leak, crack, get damaged by heat and debris or just get too old.  If yours is ten years old or older, it's likely getting close to the end of its life.

If you think you can just wait until it fails completely, think of these possible consequences.  If the hose or a coupling fails, power steering fluid can blow all over the hot engine.  That fluid is flammable and can start a fire.  Or if you've been driving for a few weeks with low power steering fluid, that could ruin your power steering pump. Replacing the pump is an extra expense you can probably  live without.

A technician will replace the necessary parts and make sure air and contaminants are bled or flushed from the system.  Then, he or she will check for leaks.  Just think how important a properly working power steering system is for safe operation of your vehicle.  Make sure you keep yours in top shape for your safety's sake and the safety of others on the road around you.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Keeping Your Cool (Coolant leak repair)

If there’s one thing you should pay attention to with your vehicle, it’s the temperature gauge. It’s the one that may say C---H (that means “cold---hot”).  Or maybe yours has a picture of a thermometer on it and a blue and red zone.  If you see the needle heading farther to the “H” or red area, that means your vehicle’s engine is running hotter than it normally does.

One of the most common causes of an engine running hot is a leak in your cooling system.  Maybe you’ve seen puddles of coolant under your vehicle, or you’ve smelled the coolant, either inside or outside your vehicle (it has a sort of “sweet” or fruity smell). That’s your engine giving you a warning signal that it’s time to head over to your repair facility to find out what’s going on.

Your vehicle’s coolant can leak for several reasons.  You may have hoses that are deteriorating (heat and age take their toll). It’s possible the pump that circulates coolant has developed a problem (seals and bearings can fail from heat and wear).  You may have something as simple as a bad radiator cap.  Or your radiator or heater core may have holes in it. 

If your coolant is leaking out, this can cause serious damage to your engine if you just let it go.  Your engine could get so hot that some of the metal parts start to warp.  Sometimes, your coolant can start mixing in with your engine oil.  That can result in a very expensive repair if it gets to that stage, so have it checked out before that happens.

A technician will visually inspect your coolant system, including the reservoir tank, check hoses and fittings, test the water pump, and also may pressure test the radiator.  When the problem or problems are found, they will replace the necessary parts and get you back on the road. 

When it comes to a coolant leak, finding the cause can be tricky.  But it’s important to catch a cooling system issue in time—before your engine sustains more serious damage.  Now, that’s pretty cool.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

The Sign of the Shield (Heat Shield Repair and Replacement)

Even in the months where temperatures are cooler, heat is still an enemy of your vehicle.  When your engine runs, it creates heat, so there are numerous heat shields that protect other parts from those higher temperatures. Heat shields are installed around several areas of the exhaust system.  Others prevent heat from reaching parts of the vehicle.  Still others prevent heat from reaching the ground (or maybe grass underneath) and starting a fire. 

If you remember your space travel history, you'll know how important a heat shield can be. John Glenn was the first American to orbit the earth, but during that maiden orbital flight, a sensor on board was indicating the heat shield on his capsule, Friendship 7, was loose.  If it had come off, his spacecraft could have burned up upon re-entry.  Fortunately, the heat shield stayed on, and Glenn made history.

Unfortunately, the heat shields on your vehicle don't have warning systems like the space vehicles did.  So you have to maintain them.  Heat shields are constantly exposed to elements like water, salt, sand and dirt.  That makes them prone to rusting and corroding.  Here's one unfortunate fact: Materials that make them good at preventing heat transmission also are soft and vulnerable, often aluminum or special fabric. 

One sign a heat shield will give you that it's loose is noise; you'll sometimes hear it rattling underneath your vehicle when it's running. One way to locate it? Put your vehicle in park, leave the engine running and take a listen outside.  It's usually pretty easy to pinpoint the location.

Make a note of the noise when you are talking with your service advisor. It's important to have those heat shields working correctly so the heat is kept away from your other vehicle systems and combustibles on the ground. The good news is that heat shields can frequently be inexpensively repaired or re-attached.  In other cases, they should be replaced. 

Missing or loose heat shields? Let's just say they're not cool.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903