AUTONET TV

When "Oh, no!" Turns Into, "All right!"

Things we don't expect happen to our vehicles. And let's face, no one really wants to spend money on an unexpected repair. But if you are putting off going to your vehicle repair facility because you're dreading bad news, you might just be putting off some good news.

There was one minivan driver who'd had the same van for years and never had a problem with the power sliding doors.  Then one day, the electrical switches in the door pillars stopped working.  The key fob would still open them, but the door switches wouldn't do a thing.

Of course, the van driver feared the worst: an electrical problem, a major computer failure, mice chewing up the wires.  So, he put off going into the repair facility for a couple of months.  One day, it was time for his regular oil change and the service advisor asked him if there was anything else going on with the van.  The owner mentioned the door problem but said he didn't want to spend a fortune on it.

He waited for his van, and it wasn't long before the service advisor came out with good news. The doors weren't working because a switch on the overhead console had been turned off.  (It was a safety feature to allow parents to disable them.) The owner had accidentally switched it when he was unloading the van.  It was the first thing the technician had checked. Flip the switch back and all was working as usual.

Another example? A mother was driving a minivan with her two kids inside on a hot day when she felt the front end shaking violently as she drove down the road. Fearing something major had broken in the van (and fearing for the safety of her kids), she pulled into a fast-food restaurant parking lot and started to look underneath to see if it was anything obvious she could see.

She couldn't see any broken parts, but she also didn't feel safe getting back in the van with her kids.  So, she called her local service facility and asked if they could send someone to look at it.  When the technician arrived, he took it for a test drive on the same road on which she'd described having the trouble.  Then he put her van up on the lift.  His conclusion?  Nothing was wrong with her van.  It was the street she was driving on.  Crews repairing it had left the surface full of potholes, and that was causing her rough ride.

Ultimately, what these two drivers feared would be an expensive trip to the shop resulted in each driver getting different news than they had expected.  One learned something new about his vehicle.  The other?  Well, the technician saw that her tires were badly worn and convinced her to get them replaced, perhaps preventing an accident and giving peace of mind for a mom with two kids.

For Brakes' Sake (Brake Rotor Service in Idaho Falls)

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your All Things Automotive & Diesel Service service advisor can make the best decision on which direction you want to go with your new brakes.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903

Cruisin' on Down Main Street

When automakers first came out with cruise control, it was a real luxury item.  The older cruise controls used a mechanical vacuum system but it worked.  Well, some of the time. 

Now days, cruise control is all electronic, thanks to computers.  It's reliable and a real convenience on long trips.  Cruise control is offered on most vehicles and standard on a lot of them.  Because it's electronic, when it breaks, it's usually some electronic component.  Your vehicle's cruise can be the victim of a blown fuse. Or your vehicle's speed sensor, which—not surprisingly—measures your vehicle's speed, can also stop working.  And that will cause your cruise to stop cruising. 

Vehicles with cruise control also have a built-in feature that, when the brakes are applied, turns off the cruise.  With electronic cruise control, that happens thanks to the brake pedal switch, and if a problem develops in that switch, the cruise might not work.

The newest cruise control is called "adaptive." What that means is that it will maintain your vehicle's speed as well as the distance between you and the vehicle ahead of you.  That means if a car ahead of you slows down, your vehicle will slow down to the same speed and even stop if the car ahead stops.  Pretty cool, right? As you can imagine, adaptive cruise control is more sophisticated and has many more components than standard cruise.  The systems vary from manufacturer to manufacturer, but they use on-board radar units and cameras to calculate what your vehicle should do to maintain a safe distance and speed. 

Finally, there are still some of the older style cruise controls out on the roads.  They'll stop working when the vacuum actuator develops a problem, a vacuum hose starts leaking or breaks or the cable between the actuator and the throttle kinks, breaks, seizes up or becomes detached. 

If your cruise control isn't working, your service repair facility will be able to determine what kind your vehicle has and what it will take to fix it.  Good news for the cruise blues.

Give me a Brake (Light)!

If that little brake warning light pops up on your dash, do you know what it means? Well, if you said no, you wouldn't be alone. You know it has something to do with your brakes, but exactly what? You're not sure. One of the reasons is that it could mean a lot of different things.

It could be something simple, like you put your parking brake on and forgot to take it off. Easy fix, you're on the road in seconds.

Or, it could mean there's something wrong with your anti-lock brake system. That is a pretty complex symphony of speed sensors, computers and wiring, and sometimes things get a little out of whack. You could have a defective sensor or some wiring may have gotten damaged or come loose. A trained technician at All Things Automotive & Diesel Service with special equipment can sort it all out.

It's also possible you have low brake fluid. That could be caused by a number of things. One simple reason is that your brake pads have worn down. Replacing them could solve the problem. Another possibility is that you have a leak in your brake system. That could be serious. If your brake fluid level gets really low, your stopping power goes down along with it, and a vehicle that can't stop is a safety hazard to you and others on the road.

Of all the warning lights on your instrument panel, pay attention to the brake warning light. If it comes on, come on over to All Things Automotive & Diesel Service very, very soon. A vehicle is great when it's moving. But if it can't stop, well, that is a disaster waiting to happen.

We’d love to hear from you. Let us know if you have any questions.

All Things Automotive & Diesel Service
1997 Walton Ave #C
Idaho Falls, ID 83401
208-523-3903